Our Measurement Tool
____________________________________________________________________________________
Measurement Instructions with Our Measurement Tool
The ends of the measurement tool have the same shape/profile as our muntin bar. Note that the profile of the tool is elevated 2mm from the surface of the glass. This is to place the muntin bar away from the glass surface and create space so that water and dirt do not accumulate along each horizontal muntin bar.
This is how your muntin will be positioned and appear when finished.
____________________________________________________________________________________
____________________________________________________________________________________
Follow the Instructions Below
First, ensure that the angle of the measuring tape matches the glass trim.
Press the end of the measuring tool against the edge of the glass trim. Ensure it stays against the glass.
____________________________________________________________________________________
Measurement
Extend the measuring tape and hold it against the glass trim on the opposite side.
Ensure it stays against the glass when taking measurements, with the ends of the tape against the glass trim and not caught on the rubber trim of your window.
____________________________________________________________________________________
Reading
Read the measurement at the arrow! Enter these measurements in the order form and select the measurement method "Used our measurement tool".
____________________________________________________________________________________
Bottom Edge Plate
If your window has a bottom edge plate, measure down to the edge of the plate, as far as you can measure, ensuring the measuring tape stays against the glass.
From this measurement, subtract 2mm from the height of the muntin to accommodate the steel clip.
____________________________________________________________________________________
________________________________________________________________________________________